Magnetic sensor
In the basic magnetic guided AGV setup, the Roboteq controller will read the position of the magnetic tape from the MGS sensor and will convert it ...
Mon, 27 Oct, 2025 at 1:16 PM
Hardware connections Connect CAN-H to CAN-H and CAN-L to CAN-L. A 120 Ω termination resistor must be installed between CAN-H and CAN-L on the CAN bus. ...
Mon, 24 Aug, 2026 at 6:13 PM
This article provides general guidelines for installing and maintaining the magnetic guidance track. Proper installation ensures reliable AGV operation and ...
Mon, 11 May, 2026 at 12:23 PM