Introduction
Depending the screen-size and the resolution, the Roborun+ Utility might incorrectly show the parameters mixed or fragmented (Picture 1, below). There is a very easy fix which will allow the utility to properly show the window fully and with a high resolution.
Instructions:
1) Right click on the Roborun+ Utility icon located on your Desktop and select "Properties".
2) On the new pop-up window click on the "Compatibility" tab and then click the "Change Settings for all Users" button.
3) On the new pop-up, click on the "Change high DPI settings".
4) On the new pop-up, check the box at the bottom saying "Override high DPI scaling behavior. Scaling performed by:" and select the option "System (Enhanced)" from the drop-down menu. Click on "OK".
5) With the last window closed, click on "Apply" to the previous pop-up and then "OK" which will also close it.
6) Finally, click on "OK" to close the Roborun+ Properties window and open as usual the Roborun+ Utility. The parameters should be showing correctly now.
