Motor Controller Troubleshooting
The Hall sensors are placed inside a motor 120 degrees apart. When the magnetic rotor passes from the sensors it will energize them every 60 degrees within ...
Tue, 20 Jun, 2023 at 3:12 PM
USB connection problems can be divided in two main categories: Transient errors. When the USB connection is temporary dropping. This can happen for ex...
Wed, 8 Feb, 2023 at 5:20 PM
Error description The Short Circuit Error will trigger when the motor current exceeds 120% of the controller's peak current. This value is hardcoded...
Fri, 1 Sep, 2023 at 2:51 PM
Introduction There have been cases where a user chooses thermistors with values 1K or lower, while our pull-up resistor is considered to have value o...
Mon, 3 Jun, 2024 at 3:09 PM